Is, Ih, Ir, Iy Series End Suction Pump Price Model

Pump Center

Service Hotline

Address: Room 1499, Building 7, Jiang'an Jincheng Community, Yinpen South Road, Yuelu District, Changsha

Is, Ih, Ir, Iy Series End Suction Pump

IS, IH, IR, IY single-stage single suction cantilever centrifugal pumps can be widely used in chemical, industrial and urban water supply and drainage. The heating, hot water, air conditioning systems of various buildings and metallurgical, textile, rubber, printing and dyeing, sugar and other industrial sectors can also be used for agricultural irrigation and oil transmission.

Key words:

category:

Pump consultation:

Pump Description

summary:

Parameter range:

Flow Q 5.4~400m3/h, lift H 4~125m

Model description:

IS100—65J—200A

IS - Single stage single suction cantilever centrifugal pump

100 - diameter of suction inlet (mm)

65 -- Discharge outlet diameter (mm)

J-J stands for speed reduction

200 - nominal diameter of impeller (mm)

A-A, B and C represent the first, second and third cutting of impeller outer diameter respectively

Structural type:

The pump is installed horizontally, with horizontal axial suction and upward radial discharge. The pump is of suspension type structure, so it is not necessary to dismantle the inlet and outlet pipelines during maintenance, and the rotor components can be removed for maintenance. The pump is connected to the motor through ordinary elastic coupling or extended elastic coupling, and the shaft seal of the pump adopts packing seal or mechanical seal. The bearing is a single row radial ball bearing, lubricated with thin oil. Rotation direction: Seen from the motor end, the pump rotates clockwise.

IS type is a standard ordinary end suction pump. The following end suction pumps for special purposes can be derived by changing the material of flow passage components and adding the pump cooling system mechanism:

(1) The flow passage components are IH chemical pumps made of stainless steel, which are used to transport corrosive liquids;

(2) IR type hot water pump with cooling system structure is added for hot water delivery;

(3) The IY type oil pump after changing the material and sealing form is used for oil transmission.

Performance parameter table