Pump Center
Contact Us
Service Hotline
Address: Room 1499, Building 7, Jiang'an Jincheng Community, Yinpen South Road, Yuelu District, Changsha
Swan XJ pump
Key words:
category:
Pump Description
XJ and XY pumps are horizontal single-stage double-suction horizontal split-type centrifugal clean water pumps. Suitable for large thermal power plants, industrial and mining, urban and farmland water supply and drainage projects. It is used to transport clean water without solid particles (abrasives) or other liquids with physical and chemical properties similar to water. The temperature of the liquid being transported is not higher than 60°C.
Parameter range:
Flow Q 2.0～6.47m3/s Head H 12.0～64.3m
Model Description:
XJ56—28J, XY56—16A XJ, XY—represents a large horizontal single-stage double-suction horizontal split centrifugal pump; 56—the number obtained by dividing the suction caliber by 25 (that is, the suction caliber is 1400mm); 28, 16—pump ratio The approximate integer obtained by dividing the rotational speed by 10; J—the pump speed change mark; A(B, C)—the impeller diameter change mark.
Structure type:
XJ, XY horizontal split pump, the suction and discharge pipes are arranged horizontally on the same line, and the motor can be connected with either end of the pump shaft. The pump seal is in the form of a packing seal. XJ type pump adopts rolling bearing, XY type pump adopts sliding bearing, both of which are lubricated by thin oil.
turn around:
From the motor side, the XJ48-18 and XY pumps rotate counterclockwise, that is, the suction port is on the left and the discharge port is on the right; the XJ56-23 and XJ56-28 pumps are clockwise, that is, the suction port is on the right and the discharge port is on the right. Exit is on the left.
Main parts material:
Impeller in cast iron, cast steel or stainless steel Pump body, pump cover, sealing ring in cast iron or cast steel Shaft in high quality carbon steel or stainless steel Complete range: supply pump and electric motor complete. When ordering, please indicate the material of the main parts. If you have special requirements for pumps and motors, you can negotiate with our company for relevant technical requirements.
RELATED PRODUCTS
Online Message
24-hour service hotline
